Go to the first, previous, next, last section, table of contents.

6 MySQL Language Reference

MySQL has a very complex, but intuitive and easy to learn SQL interface. This chapter describes the various commands, types, and functions you will need to know in order to use MySQL efficiently and effectively. This chapter also serves as a reference to all functionality included in MySQL. In order to use this chapter effectively, you may find it useful to refer to the various indexes.

6.1 Language Structure

6.1.1 Literals: How to Write Strings and Numbers

This section describes the various ways to write strings and numbers in MySQL. It also covers the various nuances and ``gotchas'' that you may run into when dealing with these basic types in MySQL.

6.1.1.1 Strings

A string is a sequence of characters, surrounded by either single quote (`'') or double quote (`"') characters (only the single quote if you run in ANSI mode). Examples: 

'a string'
"another string"

Within a string, certain sequences have special meaning. Each of these sequences begins with a backslash (`\'), known as the escape character. MySQL recognises the following escape sequences:

\0
An ASCII 0 (NUL) character.
\'
A single quote (`'') character.
\"
A double quote (`"') character.
\b
A backspace character.
\n
A newline character.
\r
A carriage return character.
\t
A tab character.
\z
ASCII(26) (Control-Z). This character can be encoded to allow you to work around the problem that ASCII(26) stands for END-OF-FILE on Windows. (ASCII(26) will cause problems if you try to use mysql database < filename.)
\\
A backslash (`\') character.
\%
A `%' character. This is used to search for literal instances of `%' in contexts where `%' would otherwise be interpreted as a wildcard character. See section 6.3.2.1 String Comparison Functions.
\_
A `_' character. This is used to search for literal instances of `_' in contexts where `_' would otherwise be interpreted as a wildcard character. See section 6.3.2.1 String Comparison Functions.

Note that if you use `\%' or `\_' in some string contexts, these will return the strings `\%' and `\_' and not `%' and `_'.

There are several ways to include quotes within a string:

The SELECT statements shown here demonstrate how quoting and escaping work: 

mysql> SELECT 'hello', '"hello"', '""hello""', 'hel''lo', '\'hello';
+-------+---------+-----------+--------+--------+
| hello | "hello" | ""hello"" | hel'lo | 'hello |
+-------+---------+-----------+--------+--------+

mysql> SELECT "hello", "'hello'", "''hello''", "hel""lo", "\"hello";
+-------+---------+-----------+--------+--------+
| hello | 'hello' | ''hello'' | hel"lo | "hello |
+-------+---------+-----------+--------+--------+

mysql> SELECT "This\nIs\nFour\nlines";
+--------------------+
| This
Is
Four
lines |
+--------------------+

If you want to insert binary data into a string column (such as a BLOB), the following characters must be represented by escape sequences:

NUL
ASCII 0. You should represent this by `\0' (a backslash and an ASCII `0' character).
\
ASCII 92, backslash. Represent this by `\\'.
'
ASCII 39, single quote. Represent this by `\''.
"
ASCII 34, double quote. Represent this by `\"'.

If you write C code, you can use the C API function mysql_real_escape_string() to escape characters for the INSERT statement. See section 8.4.2 C API Function Overview. In Perl, you can use the quote method of the DBI package to convert special characters to the proper escape sequences. See section 8.2.2 The DBI Interface.

You should use an escape function on any string that might contain any of the special characters listed above!

Alternatively, many MySQL APIs provide some sort of placeholder capability that allows you to insert special markers into a query string, and then bind data values to them when you issue the query. In this case, the API takes case of escaping special characters in the values for you automatically.

6.1.1.2 Numbers

Integers are represented as a sequence of digits. Floats use `.' as a decimal separator. Either type of number may be preceded by `-' to indicate a negative value.

Examples of valid integers: 

1221
0
-32

Examples of valid floating-point numbers: 

294.42
-32032.6809e+10
148.00

An integer may be used in a floating-point context; it is interpreted as the equivalent floating-point number.

6.1.1.3 Hexadecimal Values

MySQL supports hexadecimal values. In numeric context these act like an integer (64-bit precision). In string context these act like a binary string where each pair of hex digits is converted to a character: 

mysql> SELECT x'4D7953514C';
         -> MySQL
mysql> SELECT 0xa+0;
         -> 10
mysql> SELECT 0x5061756c;
         -> Paul

The x'hexstring' syntax (new in 4.0) is based on ANSI SQL and the 0x syntax is based on ODBC. Hexadecimal strings are often used by ODBC to supply values for BLOB columns. You can convert a string or a number to hexadecimal with the HEX() function.

6.1.1.4 NULL Values

The NULL value means ``no data'' and is different from values such as 0 for numeric types or the empty string for string types. See section A.5.3 Problems with NULL Values.

NULL may be represented by \N when using the text file import or export formats (LOAD DATA INFILE, SELECT ... INTO OUTFILE). See section 6.4.9 LOAD DATA INFILE Syntax.

6.1.2 Database, Table, Index, Column, and Alias Names

Database, table, index, column, and alias names all follow the same rules in MySQL.

Note that the rules changed starting with MySQL Version 3.23.6 when we introduced quoting of identifiers (database, table, and column names) with ``'. `"' will also work to quote identifiers if you run in ANSI mode. See section 1.8.2 Running MySQL in ANSI Mode.

Identifier Max length Allowed characters
Database 64 Any character that is allowed in a directory name except `/', `\' or `.'.
Table 64 Any character that is allowed in a file name, except `/' or `.'.
Column 64 All characters.
Alias 255 All characters.

Note that in addition to the above, you can't have ASCII(0) or ASCII(255) or the quoting character in an identifier.

Note that if the identifier is a restricted word or contains special characters you must always quote it with a ` (backtick) when you use it: 

mysql> SELECT * FROM `select` WHERE `select`.id > 100;

See section 6.1.7 Is MySQL Picky About Reserved Words?.

In MySQL versions prior to 3.23.6, the name rules are as follows:

It is recommended that you do not use names like 1e, because an expression like 1e+1 is ambiguous. It may be interpreted as the expression 1e + 1 or as the number 1e+1.

In MySQL you can refer to a column using any of the following forms:

Column reference Meaning
col_name Column col_name from whichever table used in the query contains a column of that name.
tbl_name.col_name Column col_name from table tbl_name of the current database.
db_name.tbl_name.col_name Column col_name from table tbl_name of the database db_name. This form is available in MySQL Version 3.22 or later.
`column_name` A column that is a keyword or contains special characters.

You need not specify a tbl_name or db_name.tbl_name prefix for a column reference in a statement unless the reference would be ambiguous. For example, suppose tables t1 and t2 each contain a column c, and you retrieve c in a SELECT statement that uses both t1 and t2. In this case, c is ambiguous because it is not unique among the tables used in the statement, so you must indicate which table you mean by writing t1.c or t2.c. Similarly, if you are retrieving from a table t in database db1 and from a table t in database db2, you must refer to columns in those tables as db1.t.col_name and db2.t.col_name.

The syntax .tbl_name means the table tbl_name in the current database. This syntax is accepted for ODBC compatibility, because some ODBC programs prefix table names with a `.' character.

6.1.3 Case Sensitivity in Names

In MySQL, databases and tables correspond to directories and files within those directories. Consequently, the case-sensitivity of the underlying operating system determines the case-sensitivity of database and table names. This means database and table names are case-insensitive in Windows, and case-sensitive in most varieties of Unix. One prominent exception here is Mac OS X, when the default HFS+ file system is being used. However Mac OS X also supports UFS volumes, those are case sensitive on Mac OS X just like they are on any Unix. See section 1.8.3 MySQL Extensions to ANSI SQL92.

Note: although database and table names are case-insensitive for Windows, you should not refer to a given database or table using different cases within the same query. The following query would not work because it refers to a table both as my_table and as MY_TABLE: 

mysql> SELECT * FROM my_table WHERE MY_TABLE.col=1;

Column names and column aliases are case-insensitive in all cases.

Aliases on tables are case-sensitive. The following query would not work because it refers to the alias both as a and as A: 

mysql> SELECT col_name FROM tbl_name AS a
    ->                 WHERE a.col_name = 1 OR A.col_name = 2;

If you have trouble remembering the lettercase for database and table names, adopt a consistent convention, such as always creating databases and tables using lowercase names.

One way to avoid this problem is to start mysqld with -O lower_case_table_names=1. By default this option is 1 on Windows and 0 on Unix.

If lower_case_table_names is 1 MySQL will convert all table names to lowercase on storage and lookup. (From version 4.0.2, this option also applies to database names.) Note that if you change this option, you need to first convert your old table names to lower case before starting mysqld.

If you move MyISAM files from a Windows to a Unix disk, you may in some cases need to use the `mysql_fix_extensions' tool to fix-up the case of the file extensions in each specified database directory (lowercase `.frm', uppercase `.MYI' and `.MYD'). `mysql_fix_extensions' can be found in the `scripts' subdirectory.

6.1.4 User Variables

MySQL supports connection-specific user variables with the @variablename syntax. A variable name may consist of alphanumeric characters from the current character set and also `_', `$', and `.' . The default character set is ISO-8859-1 Latin1; this may be changed with the --default-character-set option to mysqld. See section 4.6.1 The Character Set Used for Data and Sorting.

Variables don't have to be initialised. They contain NULL by default and can store an integer, real, or string value. All variables for a thread are automatically freed when the thread exits.

You can set a variable with the SET syntax: 

SET @variable= { integer expression | real expression | string expression }
[,@variable= ...].

You can also assign a value to a variable in statements other than SET. However, in this case the assignment operator is := rather than =, because = is reserved for comparisons in non-SET statements: 

mysql> SELECT @t1:=(@t2:=1)+@t3:=4,@t1,@t2,@t3;
+----------------------+------+------+------+
| @t1:=(@t2:=1)+@t3:=4 | @t1  | @t2  | @t3  |
+----------------------+------+------+------+
|                    5 |    5 |    1 |    4 |
+----------------------+------+------+------+

User variables may be used where expressions are allowed. Note that this does not currently include contexts where a number is explicitly required, such as in the LIMIT clause of a SELECT statement, or the IGNORE number LINES clause of a LOAD DATA statement.

Note: in a SELECT statement, each expression is evaluated only when it's sent to the client. This means that in the HAVING, GROUP BY, or ORDER BY clause, you can't refer to an expression that involves variables that are set in the SELECT part. For example, the following statement will NOT work as expected: 

mysql> SELECT (@aa:=id) AS a, (@aa+3) AS b FROM table_name HAVING b=5;

The reason is that @aa will not contain the value of the current row, but the value of id for the previous accepted row.

The rule is to never assign and use the same variable in the same statement.

6.1.5 System Variables

Starting from MySQL 4.0.3 we provide better access to a lot of system and connection variables. One can change most of them without having to take down the server.

There are two kind of system variables: Thread-specific (or connection-specific) variables that are unique to the current connection and global variables that are used to configure global events. Global variables also are used to set up the initial values of the corresponding thread-specific variables for new connections.

When mysqld starts, all global variables are initialised from command line arguments and option files. You can change the value with the SET GLOBAL command. When a new thread is created, the thread-specific variables are initialised from the global variables and they will not change even if you issue a new SET GLOBAL command.

To set the value for a GLOBAL variable, you should use one of the following syntaxes: (Here we use sort_buffer_size as an example variable) 

SET GLOBAL sort_buffer_size=value;
SET @@global.sort_buffer_size=value;

To set the value for a SESSION variable, you can use one of the following syntaxes: 

SET SESSION sort_buffer_size=value;
SET @@session.sort_buffer_size=value;
SET sort_buffer_size=value;

If you don't specify GLOBAL or SESSION then SESSION is used. See section 5.5.6 SET Syntax.

LOCAL is a synonym for SESSION.

To retrieve the value for a GLOBAL variable you can use one of the following commands: 

SELECT @@global.sort_buffer_size;
SHOW GLOBAL VARIABLES like 'sort_buffer_size';

To retrieve the value for a SESSION variable you can use one of the following commands: 

SELECT @@session.sort_buffer_size;
SHOW SESSION VARIABLES like 'sort_buffer_size';

When you retrieve a variable value with the @@variable_name syntax and you don't specify GLOBAL or SESSION then MySQL will return the thread-specific (SESSION) value if it exists. If not, MySQL will return the global value.

The reason for requiring GLOBAL for setting GLOBAL only variables but not for retrieving them is to ensure that we don't later run into problems if we later would introduce a thread-specific variable with the same name or remove a thread-specific variable. In this case, you could accidentally change the state for the server as a whole, rather than just for your own connection.

The following is a full list of all variables that you change and retrieve and if you can use GLOBAL or SESSION with them.

Variable name Value type Type
autocommit bool SESSION
big_tables bool SESSION
binlog_cache_size num GLOBAL
bulk_insert_buffer_size num GLOBAL | SESSION
concurrent_insert bool GLOBAL
connect_timeout num GLOBAL
convert_character_set string SESSION
delay_key_write OFF | ON | ALL GLOBAL
delayed_insert_limit num GLOBAL
delayed_insert_timeout num GLOBAL
delayed_queue_size num GLOBAL
error_count num LOCAL
flush bool GLOBAL
flush_time num GLOBAL
foreign_key_checks bool SESSION
identity num SESSION
insert_id bool SESSION
interactive_timeout num GLOBAL | SESSION
join_buffer_size num GLOBAL | SESSION
key_buffer_size num GLOBAL
last_insert_id bool SESSION
local_infile bool GLOBAL
log_warnings bool GLOBAL
long_query_time num GLOBAL | SESSION
low_priority_updates bool GLOBAL | SESSION
max_allowed_packet num GLOBAL | SESSION
max_binlog_cache_size num GLOBAL
max_binlog_size num GLOBAL
max_connect_errors num GLOBAL
max_connections num GLOBAL
max_error_count num GLOBAL | SESSION
max_delayed_threads num GLOBAL
max_heap_table_size num GLOBAL | SESSION
max_join_size num GLOBAL | SESSION
max_sort_length num GLOBAL | SESSION
max_tmp_tables num GLOBAL
max_user_connections num GLOBAL
max_write_lock_count num GLOBAL
myisam_max_extra_sort_file_size num GLOBAL | SESSION
myisam_max_sort_file_size num GLOBAL | SESSION
myisam_sort_buffer_size num GLOBAL | SESSION
net_buffer_length num GLOBAL | SESSION
net_read_timeout num GLOBAL | SESSION
net_retry_count num GLOBAL | SESSION
net_write_timeout num GLOBAL | SESSION
query_cache_limit num GLOBAL
query_cache_size num GLOBAL
query_cache_type enum GLOBAL
read_buffer_size num GLOBAL | SESSION
read_rnd_buffer_size num GLOBAL | SESSION
rpl_recovery_rank num GLOBAL
safe_show_database bool GLOBAL
server_id num GLOBAL
slave_compressed_protocol bool GLOBAL
slave_net_timeout num GLOBAL
slow_launch_time num GLOBAL
sort_buffer_size num GLOBAL | SESSION
sql_auto_is_null bool SESSION
sql_big_selects bool SESSION
sql_big_tables bool SESSION
sql_buffer_result bool SESSION
sql_log_binlog bool SESSION
sql_log_off bool SESSION
sql_log_update bool SESSION
sql_low_priority_updates bool GLOBAL | SESSION
sql_max_join_size num GLOBAL | SESSION
sql_quote_show_create bool SESSION
sql_safe_updates bool SESSION
sql_select_limit bool SESSION
sql_slave_skip_counter num GLOBAL
sql_warnings bool SESSION
table_cache num GLOBAL
table_type enum GLOBAL | SESSION
thread_cache_size num GLOBAL
timestamp bool SESSION
tmp_table_size enum GLOBAL | SESSION
tx_isolation enum GLOBAL | SESSION
version string GLOBAL
wait_timeout num GLOBAL | SESSION
warning_count num LOCAL
unique_checks bool SESSION

Variables that are marked with num can be given a numerical value. Variables that are marked with bool can be set to 0, 1, ON or OFF. Variables that are of type enum should normally be set to one of the available values for the variable, but can also be set to the number that correspond to the enum value. (The first enum value is 0).

Here is a description of some of the variables:

Variable Description
identity Alias for last_insert_id (Sybase compatiblity)
sql_low_priority_updates Alias for low_priority_updates
sql_max_join_size Alias for max_join_size
delay_key_write_for_all_tables If this and delay_key_write are set, then all new MyISAM tables that are opened will use delayed key writes.
version Alias for VERSION() (Sybase (?) compatability)

A description of the other variable definitions can be found in the startup options section, the description of SHOW VARIABLES and in the SET section. See section 4.1.1 mysqld Command-line Options. See section 4.5.6.4 SHOW VARIABLES. See section 5.5.6 SET Syntax.

6.1.6 Comment Syntax

The MySQL server supports the # to end of line, -- to end of line and /* in-line or multiple-line */ comment styles: 

mysql> SELECT 1+1;     # This comment continues to the end of line
mysql> SELECT 1+1;     -- This comment continues to the end of line
mysql> SELECT 1 /* this is an in-line comment */ + 1;
mysql> SELECT 1+
/*
this is a
multiple-line comment
*/
1;

Note that the -- (double-dash) comment style requires you to have at least one space after the second dash!

Although the server understands the comment syntax just described, there are some limitations on the way that the mysql client parses /* ... */ comments:

These limitations apply both when you run mysql interactively and when you put commands in a file and tell mysql to read its input from that file with mysql < some-file.

MySQL supports the `--' ANSI SQL comment style only if the second dash is followed by a space. See section 1.8.4.7 `--' as the Start of a Comment.

6.1.7 Is MySQL Picky About Reserved Words?

A common problem stems from trying to create a table with column names that use the names of datatypes or functions built into MySQL, such as TIMESTAMP or GROUP. You're allowed to do it (for example, ABS is an allowed column name), but whitespace is not allowed between a function name and the immediately following `(' when using functions whose names are also column names.

The following words are explicitly reserved in MySQL. Most of them are forbidden by ANSI SQL92 as column and/or table names (for example, GROUP). A few are reserved because MySQL needs them and is (currently) using a yacc parser:

Word Word Word
ADD ALL ALTER
ANALYZE AND AS
ASC AUTO_INCREMENT BDB
BEFORE BERKELEYDB BETWEEN
BIGINT BINARY BLOB
BOTH BTREE BY
CASCADE CASE CHANGE
CHAR CHARACTER CHECK
COLLATE COLUMN COLUMNS
CONSTRAINT CREATE CROSS
CURRENT_DATE CURRENT_TIME CURRENT_TIMESTAMP
DATABASE DATABASES DAY_HOUR
DAY_MINUTE DAY_SECOND DEC
DECIMAL DEFAULT DELAYED
DELETE DESC DESCRIBE
DISTINCT DISTINCTROW DIV
DOUBLE DROP ELSE
ENCLOSED ERRORS ESCAPED
EXISTS EXPLAIN FALSE
FIELDS FLOAT FOR
FORCE FOREIGN FROM
FULLTEXT FUNCTION GRANT
GROUP HASH HAVING
HIGH_PRIORITY HOUR_MINUTE HOUR_SECOND
IF IGNORE IN
INDEX INFILE INNER
INNODB INSERT INT
INTEGER INTERVAL INTO
IS JOIN KEY
KEYS KILL LEADING
LEFT LIKE LIMIT
LINES LOAD LOCALTIME
LOCALTIMESTAMP LOCK LONG
LONGBLOB LONGTEXT LOW_PRIORITY
MASTER_SERVER_ID MATCH MEDIUMBLOB
MEDIUMINT MEDIUMTEXT MIDDLEINT
MINUTE_SECOND MOD MRG_MYISAM
NATURAL NOT NULL
NUMERIC ON OPTIMIZE
OPTION OPTIONALLY OR
ORDER OUTER OUTFILE
PRECISION PRIMARY PRIVILEGES
PROCEDURE PURGE READ
REAL REFERENCES REGEXP
RENAME REPLACE REQUIRE
RESTRICT RETURNS REVOKE
RIGHT RLIKE RTREE
SELECT SET SHOW
SMALLINT SOME SONAME
SPATIAL SQL_BIG_RESULT SQL_CALC_FOUND_ROWS
SQL_SMALL_RESULT SSL STARTING
STRAIGHT_JOIN STRIPED TABLE
TABLES TERMINATED THEN
TINYBLOB TINYINT TINYTEXT
TO TRAILING TRUE
TYPES UNION UNIQUE
UNLOCK UNSIGNED UPDATE
USAGE USE USER_RESOURCES
USING VALUES VARBINARY
VARCHAR VARCHARACTER VARYING
WARNINGS WHEN WHERE
WITH WRITE XOR
YEAR_MONTH ZEROFILL

The following symbols (from the table above) are disallowed by ANSI SQL but allowed by MySQL as column/table names. This is because some of these names are very natural names and a lot of people have already used them.

6.2 Column Types

MySQL supports a number of column types, which may be grouped into three categories: numeric types, date and time types, and string (character) types. This section first gives an overview of the types available and summarises the storage requirements for each column type, then provides a more detailed description of the properties of the types in each category. The overview is intentionally brief. The more detailed descriptions should be consulted for additional information about particular column types, such as the allowable formats in which you can specify values.

The column types supported by MySQL are listed below. The following code letters are used in the descriptions:

M
Indicates the maximum display size. The maximum legal display size is 255.
D
Applies to floating-point types and indicates the number of digits following the decimal point. The maximum possible value is 30, but should be no greater than M-2.

Square brackets (`[' and `]') indicate parts of type specifiers that are optional.

Note that if you specify ZEROFILL for a column, MySQL will automatically add the UNSIGNED attribute to the column.

Warning: you should be aware that when you use subtraction between integer values where one is of type UNSIGNED, the result will be unsigned! See section 6.3.5 Cast Functions.

TINYINT[(M)] [UNSIGNED] [ZEROFILL]
A very small integer. The signed range is -128 to 127. The unsigned range is 0 to 255.
BIT
BOOL
These are synonyms for TINYINT(1).
SMALLINT[(M)] [UNSIGNED] [ZEROFILL]
A small integer. The signed range is -32768 to 32767. The unsigned range is 0 to 65535.
MEDIUMINT[(M)] [UNSIGNED] [ZEROFILL]
A medium-size integer. The signed range is -8388608 to 8388607. The unsigned range is 0 to 16777215.
INT[(M)] [UNSIGNED] [ZEROFILL]
A normal-size integer. The signed range is -2147483648 to 2147483647. The unsigned range is 0 to 4294967295.
INTEGER[(M)] [UNSIGNED] [ZEROFILL]
This is a synonym for INT.
BIGINT[(M)] [UNSIGNED] [ZEROFILL]
A large integer. The signed range is -9223372036854775808 to 9223372036854775807. The unsigned range is 0 to 18446744073709551615. Some things you should be aware of with respect to BIGINT columns:
FLOAT(precision) [UNSIGNED] [ZEROFILL]
A floating-point number. precision can be <=24 for a single-precision floating-point number and between 25 and 53 for a double-precision floating-point number. These types are like the FLOAT and DOUBLE types described immediately below. FLOAT(X) has the same range as the corresponding FLOAT and DOUBLE types, but the display size and number of decimals are undefined. In MySQL Version 3.23, this is a true floating-point value. In earlier MySQL versions, FLOAT(precision) always has 2 decimals. Note that using FLOAT may give you some unexpected problems as all calculations in MySQL are done with double precision. See section A.5.6 Solving Problems with No Matching Rows. This syntax is provided for ODBC compatibility.
FLOAT[(M,D)] [UNSIGNED] [ZEROFILL]
A small (single-precision) floating-point number. Allowable values are -3.402823466E+38 to -1.175494351E-38, 0, and 1.175494351E-38 to 3.402823466E+38. If UNSIGNED is specified, negative values are disallowed. The M is the display width and D is the number of decimals. FLOAT without arguments or FLOAT(X) where X <= 24 stands for a single-precision floating-point number.
DOUBLE[(M,D)] [UNSIGNED] [ZEROFILL]
A normal-size (double-precision) floating-point number. Allowable values are -1.7976931348623157E+308 to -2.2250738585072014E-308, 0, and 2.2250738585072014E-308 to 1.7976931348623157E+308. If UNSIGNED is specified, negative values are disallowed. The M is the display width and D is the number of decimals. DOUBLE without arguments or FLOAT(X) where 25 <= X <= 53 stands for a double-precision floating-point number.
DOUBLE PRECISION[(M,D)] [UNSIGNED] [ZEROFILL]
REAL[(M,D)] [UNSIGNED] [ZEROFILL]
These are synonyms for DOUBLE.
DECIMAL[(M[,D])] [UNSIGNED] [ZEROFILL]
An unpacked floating-point number. Behaves like a CHAR column: ``unpacked'' means the number is stored as a string, using one character for each digit of the value. The decimal point and, for negative numbers, the `-' sign, are not counted in M (but space for these is reserved). If D is 0, values will have no decimal point or fractional part. The maximum range of DECIMAL values is the same as for DOUBLE, but the actual range for a given DECIMAL column may be constrained by the choice of M and D. If UNSIGNED is specified, negative values are disallowed. If D is omitted, the default is 0. If M is omitted, the default is 10. Prior to MySQL Version 3.23, the M argument must include the space needed for the sign and the decimal point.
DEC[(M[,D])] [UNSIGNED] [ZEROFILL]
NUMERIC[(M[,D])] [UNSIGNED] [ZEROFILL]
These are synonyms for DECIMAL.
DATE
A date. The supported range is '1000-01-01' to '9999-12-31'. MySQL displays DATE values in 'YYYY-MM-DD' format, but allows you to assign values to DATE columns using either strings or numbers. See section 6.2.2.2 The DATETIME, DATE, and TIMESTAMP Types.
DATETIME
A date and time combination. The supported range is '1000-01-01 00:00:00' to '9999-12-31 23:59:59'. MySQL displays DATETIME values in 'YYYY-MM-DD HH:MM:SS' format, but allows you to assign values to DATETIME columns using either strings or numbers. See section 6.2.2.2 The DATETIME, DATE, and TIMESTAMP Types.
TIMESTAMP[(M)]
A timestamp. The range is '1970-01-01 00:00:00' to sometime in the year 2037. In MySQL 4.0 and earlier, TIMESTAMP values are displayed in YYYYMMDDHHMMSS, YYMMDDHHMMSS, YYYYMMDD, or YYMMDD format, depending on whether M is 14 (or missing), 12, 8, or 6, but allows you to assign values to TIMESTAMP columns using either strings or numbers. From MySQL 4.1, TIMESTAMP is returned as string with the format 'YYYY-MM-DD HH:MM:DD'. If you want to have this as a number you should add +0 to the timestamp column. Different timestamp lengths are not supported. From version 4.0.12, the --new option can be used to make the server behave as in version 4.1. A TIMESTAMP column is useful for recording the date and time of an INSERT or UPDATE operation because it is automatically set to the date and time of the most recent operation if you don't give it a value yourself. You can also set it to the current date and time by assigning it a NULL value. See section 6.2.2 Date and Time Types. The M argument affects only how a TIMESTAMP column is displayed; its values always are stored using 4 bytes each. Note that TIMESTAMP(M) columns where M is 8 or 14 are reported to be numbers while other TIMESTAMP(M) columns are reported to be strings. This is just to ensure that one can reliably dump and restore the table with these types! See section 6.2.2.2 The DATETIME, DATE, and TIMESTAMP Types.
TIME
A time. The range is '-838:59:59' to '838:59:59'. MySQL displays TIME values in 'HH:MM:SS' format, but allows you to assign values to TIME columns using either strings or numbers. See section 6.2.2.3 The TIME Type.
YEAR[(2|4)]
A year in 2- or 4-digit format (default is 4-digit). The allowable values are 1901 to 2155, 0000 in the 4-digit year format, and 1970-2069 if you use the 2-digit format (70-69). MySQL displays YEAR values in YYYY format, but allows you to assign values to YEAR columns using either strings or numbers. (The YEAR type is unavailable prior to MySQL Version 3.22.) See section 6.2.2.4 The YEAR Type.
[NATIONAL] CHAR(M) [BINARY]
A fixed-length string that is always right-padded with spaces to the specified length when stored. The range of M is 0 to 255 characters (1 to 255 prior to MySQL Version 3.23). Trailing spaces are removed when the value is retrieved. CHAR values are sorted and compared in case-insensitive fashion according to the default character set unless the BINARY keyword is given. NATIONAL CHAR (or its equivalent short form, NCHAR) is the ANSI SQL way to define that a CHAR column should use the default CHARACTER set. This is the default in MySQL. CHAR is a shorthand for CHARACTER. MySQL allows you to create a column of type CHAR(0). This is mainly useful when you have to be compliant with some old applications that depend on the existence of a column but that do not actually use the value. This is also quite nice when you need a column that only can take 2 values: A CHAR(0), that is not defined as NOT NULL, will occupy only one bit and can take only 2 values: NULL or "". See section 6.2.3.1 The CHAR and VARCHAR Types.
CHAR
This is a synonym for CHAR(1).
[NATIONAL] VARCHAR(M) [BINARY]
A variable-length string. Note: trailing spaces are removed when the value is stored (this differs from the ANSI SQL specification). The range of M is 0 to 255 characters (1 to 255 prior to MySQL Version 4.0.2). VARCHAR values are sorted and compared in case-insensitive fashion unless the BINARY keyword is given. See section 6.5.3.1 Silent Column Specification Changes. VARCHAR is a shorthand for CHARACTER VARYING. See section 6.2.3.1 The CHAR and VARCHAR Types.
TINYBLOB
TINYTEXT
A BLOB or TEXT column with a maximum length of 255 (2^8 - 1) characters. See section 6.5.3.1 Silent Column Specification Changes. See section 6.2.3.2 The BLOB and TEXT Types.
BLOB
TEXT
A BLOB or TEXT column with a maximum length of 65535 (2^16 - 1) characters. See section 6.5.3.1 Silent Column Specification Changes. See section 6.2.3.2 The BLOB and TEXT Types.
MEDIUMBLOB
MEDIUMTEXT
A BLOB or TEXT column with a maximum length of 16777215 (2^24 - 1) characters. See section 6.5.3.1 Silent Column Specification Changes. See section 6.2.3.2 The BLOB and TEXT Types.
LONGBLOB
LONGTEXT
A BLOB or TEXT column with a maximum length of 4294967295 (2^32 - 1) characters. See section 6.5.3.1 Silent Column Specification Changes. Note that because the server/client protocol and MyISAM tables has currently a limit of 16M per communication packet / table row, you can't yet use this the whole range of this type. See section 6.2.3.2 The BLOB and TEXT Types.
ENUM('value1','value2',...)
An enumeration. A string object that can have only one value, chosen from the list of values 'value1', 'value2', ..., NULL or the special "" error value. An ENUM can have a maximum of 65535 distinct values. See section 6.2.3.3 The ENUM Type.
SET('value1','value2',...)
A set. A string object that can have zero or more values, each of which must be chosen from the list of values 'value1', 'value2', ... A SET can have a maximum of 64 members. See section 6.2.3.4 The SET Type.

6.2.1 Numeric Types

MySQL supports all of the ANSI/ISO SQL92 numeric types. These types include the exact numeric data types (NUMERIC, DECIMAL, INTEGER, and SMALLINT), as well as the approximate numeric data types (FLOAT, REAL, and DOUBLE PRECISION). The keyword INT is a synonym for INTEGER, and the keyword DEC is a synonym for DECIMAL.

The NUMERIC and DECIMAL types are implemented as the same type by MySQL, as permitted by the SQL92 standard. They are used for values for which it is important to preserve exact precision, for example with monetary data. When declaring a column of one of these types the precision and scale can be (and usually is) specified; for example: 

    salary DECIMAL(5,2)

In this example, 5 (precision) represents the number of significant decimal digits that will be stored for values, and 2 (scale) represents the number of digits that will be stored following the decimal point. In this case, therefore, the range of values that can be stored in the salary column is from -99.99 to 99.99. (MySQL can actually store numbers up to 999.99 in this column because it doesn't have to store the sign for positive numbers)

In ANSI/ISO SQL92, the syntax DECIMAL(p) is equivalent to DECIMAL(p,0). Similarly, the syntax DECIMAL is equivalent to DECIMAL(p,0), where the implementation is allowed to decide the value of p. MySQL does not currently support either of these variant forms of the DECIMAL/NUMERIC data types. This is not generally a serious problem, as the principal benefits of these types derive from the ability to control both precision and scale explicitly.

DECIMAL and NUMERIC values are stored as strings, rather than as binary floating-point numbers, in order to preserve the decimal precision of those values. One character is used for each digit of the value, the decimal point (if scale > 0), and the `-' sign (for negative numbers). If scale is 0, DECIMAL and NUMERIC values contain no decimal point or fractional part.

The maximum range of DECIMAL and NUMERIC values is the same as for DOUBLE, but the actual range for a given DECIMAL or NUMERIC column can be constrained by the precision or scale for a given column. When such a column is assigned a value with more digits following the decimal point than are allowed by the specified scale, the value is rounded to that scale. When a DECIMAL or NUMERIC column is assigned a value whose magnitude exceeds the range implied by the specified (or defaulted) precision and scale, MySQL stores the value representing the corresponding end point of that range.

As an extension to the ANSI/ISO SQL92 standard, MySQL also supports the integer types TINYINT, MEDIUMINT, and BIGINT as listed in the tables above. Another extension is supported by MySQL for optionally specifying the display width of an integer value in parentheses following the base keyword for the type (for example, INT(4)). This optional width specification is used to left-pad the display of values whose width is less than the width specified for the column, but does not constrain the range of values that can be stored in the column, nor the number of digits that will be displayed for values whose width exceeds that specified for the column. When used in conjunction with the optional extension attribute ZEROFILL, the default padding of spaces is replaced with zeroes. For example, for a column declared as INT(5) ZEROFILL, a value of 4 is retrieved as 00004. Note that if you store larger values than the display width in an integer column, you may experience problems when MySQL generates temporary tables for some complicated joins, as in these cases MySQL trusts that the data did fit into the original column width.

All integer types can have an optional (non-standard) attribute UNSIGNED. Unsigned values can be used when you want to allow only positive numbers in a column and you need a little bigger numeric range for the column.

As of MySQL 4.0.2, floating-point types also can be UNSIGNED. As with integer types, this attribute prevents negative values from being stored in the column. Unlike the integer types, the upper range of column values remains the same.

The FLOAT type is used to represent approximate numeric data types. The ANSI/ISO SQL92 standard allows an optional specification of the precision (but not the range of the exponent) in bits following the keyword FLOAT in parentheses. The MySQL implementation also supports this optional precision specification. When the keyword FLOAT is used for a column type without a precision specification, MySQL uses four bytes to store the values. A variant syntax is also supported, with two numbers given in parentheses following the FLOAT keyword. With this option, the first number continues to represent the storage requirements for the value in bytes, and the second number specifies the number of digits to be stored and displayed following the decimal point (as with DECIMAL and NUMERIC). When MySQL is asked to store a number for such a column with more decimal digits following the decimal point than specified for the column, the value is rounded to eliminate the extra digits when the value is stored.

The REAL and DOUBLE PRECISION types do not accept precision specifications. As an extension to the ANSI/ISO SQL92 standard, MySQL recognises DOUBLE as a synonym for the DOUBLE PRECISION type. In contrast with the standard's requirement that the precision for REAL be smaller than that used for DOUBLE PRECISION, MySQL implements both as 8-byte double-precision floating-point values (when not running in ``ANSI mode''). For maximum portability, code requiring storage of approximate numeric data values should use FLOAT or DOUBLE PRECISION with no specification of precision or number of decimal points.

When asked to store a value in a numeric column that is outside the column type's allowable range, MySQL clips the value to the appropriate endpoint of the range and stores the resulting value instead.

For example, the range of an INT column is -2147483648 to 2147483647. If you try to insert -9999999999 into an INT column, the value is clipped to the lower endpoint of the range, and -2147483648 is stored instead. Similarly, if you try to insert 9999999999, 2147483647 is stored instead.

If the INT column is UNSIGNED, the size of the column's range is the same but its endpoints shift up to 0 and 4294967295. If you try to store -9999999999 and 9999999999, the values stored in the column become 0 and 4294967296.

Conversions that occur due to clipping are reported as ``warnings'' for ALTER TABLE, LOAD DATA INFILE, UPDATE, and multi-row INSERT statements.

Type Bytes From To
TINYINT 1 -128 127
SMALLINT 2 -32768 32767
MEDIUMINT 3 -8388608 8388607
INT 4 -2147483648 2147483647
BIGINT 8 -9223372036854775808 9223372036854775807

6.2.2 Date and Time Types

The date and time types are DATETIME, DATE, TIMESTAMP, TIME, and YEAR. Each of these has a range of legal values, as well as a ``zero'' value that is used when you specify a really illegal value. Note that MySQL allows you to store certain 'not strictly' legal date values, for example 1999-11-31. The reason for this is that we think it's the responsibility of the application to handle date checking, not the SQL servers. To make the date checking 'fast', MySQL only checks that the month is in the range of 0-12 and the day is in the range of 0-31. The above ranges are defined this way because MySQL allows you to store, in a DATE or DATETIME column, dates where the day or month-day is zero. This is extremely useful for applications that need to store a birth-date for which you don't know the exact date. In this case you simply store the date like 1999-00-00 or 1999-01-00. (You cannot expect to get a correct value from functions like DATE_SUB() or DATE_ADD for dates like these.)

Here are some general considerations to keep in mind when working with date and time types:

6.2.2.1 Y2K Issues and Date Types

MySQL itself is Y2K-safe (see section 1.2.5 Year 2000 Compliance), but input values presented to MySQL may not be. Any input containing 2-digit year values is ambiguous, because the century is unknown. Such values must be interpreted into 4-digit form because MySQL stores years internally using four digits.

For DATETIME, DATE, TIMESTAMP, and YEAR types, MySQL interprets dates with ambiguous year values using the following rules:

Remember that these rules provide only reasonable guesses as to what your data mean. If the heuristics used by MySQL don't produce the correct values, you should provide unambiguous input containing 4-digit year values.

ORDER BY will sort 2-digit YEAR/DATE/DATETIME types properly.

Note also that some functions like MIN() and MAX() will convert a TIMESTAMP/DATE to a number. This means that a timestamp with a 2-digit year will not work properly with these functions. The fix in this case is to convert the TIMESTAMP/DATE to 4-digit year format or use something like MIN(DATE_ADD(timestamp,INTERVAL 0 DAYS)).

6.2.2.2 The DATETIME, DATE, and TIMESTAMP Types

The DATETIME, DATE, and TIMESTAMP types are related. This section describes their characteristics, how they are similar, and how they differ.

The DATETIME type is used when you need values that contain both date and time information. MySQL retrieves and displays DATETIME values in 'YYYY-MM-DD HH:MM:SS' format. The supported range is '1000-01-01 00:00:00' to '9999-12-31 23:59:59'. (``Supported'' means that although earlier values might work, there is no guarantee that they will.)

The DATE type is used when you need only a date value, without a time part. MySQL retrieves and displays DATE values in 'YYYY-MM-DD' format. The supported range is '1000-01-01' to '9999-12-31'.

The TIMESTAMP column type provides a type that you can use to automatically mark INSERT or UPDATE operations with the current date and time. If you have multiple TIMESTAMP columns, only the first one is updated automatically.

Automatic updating of the first TIMESTAMP column occurs under any of the following conditions:

TIMESTAMP columns other than the first may also be set to the current date and time. Just set the column to NULL or to NOW().

You can set any TIMESTAMP column to a value different from the current date and time by setting it explicitly to the desired value. This is true even for the first TIMESTAMP column. You can use this property if, for example, you want a TIMESTAMP to be set to the current date and time when you create a row, but not to be changed whenever the row is updated later:

On the other hand, you may find it just as easy to use a DATETIME column that you initialise to NOW() when the row is created and leave alone for subsequent updates.

TIMESTAMP values may range from the beginning of 1970 to sometime in the year 2037, with a resolution of one second. Values are displayed as numbers.

The format in which MySQL retrieves and displays TIMESTAMP values depends on the display size, as illustrated by the following table. The `full' TIMESTAMP format is 14 digits, but TIMESTAMP columns may be created with shorter display sizes:

Column type Display format
TIMESTAMP(14) YYYYMMDDHHMMSS
TIMESTAMP(12) YYMMDDHHMMSS
TIMESTAMP(10) YYMMDDHHMM
TIMESTAMP(8) YYYYMMDD
TIMESTAMP(6) YYMMDD
TIMESTAMP(4) YYMM
TIMESTAMP(2) YY

All TIMESTAMP columns have the same storage size, regardless of display size. The most common display sizes are 6, 8, 12, and 14. You can specify an arbitrary display size at table creation time, but values of 0 or greater than 14 are coerced to 14. Odd-valued sizes in the range from 1 to 13 are coerced to the next higher even number.

Note: From version 4.1, TIMESTAMP is returned as string with the format 'YYYY-MM-DD HH:MM:DD'. and different timestamp lengths are no longer supported.

You can specify DATETIME, DATE, and TIMESTAMP values using any of a common set of formats:

Illegal DATETIME, DATE, or TIMESTAMP values are converted to the ``zero'' value of the appropriate type ('0000-00-00 00:00:00', '0000-00-00', or 00000000000000).

For values specified as strings that include date part delimiters, it is not necessary to specify two digits for month or day values that are less than 10. '1979-6-9' is the same as '1979-06-09'. Similarly, for values specified as strings that include time part delimiters, it is not necessary to specify two digits for hour, minute, or second values that are less than 10. '1979-10-30 1:2:3' is the same as '1979-10-30 01:02:03'.

Values specified as numbers should be 6, 8, 12, or 14 digits long. If the number is 8 or 14 digits long, it is assumed to be in YYYYMMDD or YYYYMMDDHHMMSS format and that the year is given by the first 4 digits. If the number is 6 or 12 digits long, it is assumed to be in YYMMDD or YYMMDDHHMMSS format and that the year is given by the first 2 digits. Numbers that are not one of these lengths are interpreted as though padded with leading zeros to the closest length.

Values specified as non-delimited strings are interpreted using their length as given. If the string is 8 or 14 characters long, the year is assumed to be given by the first 4 characters. Otherwise, the year is assumed to be given by the first 2 characters. The string is interpreted from left to right to find year, month, day, hour, minute, and second values, for as many parts as are present in the string. This means you should not use strings that have fewer than 6 characters. For example, if you specify '9903', thinking that will represent March, 1999, you will find that MySQL inserts a ``zero'' date into your table. This is because the year and month values are 99 and 03, but the day part is missing (zero), so the value is not a legal date.

TIMESTAMP columns store legal values using the full precision with which the value was specified, regardless of the display size. This has several implications:

You can to some extent assign values of one date type to an object of a different date type. However, there may be some alteration of the value or loss of information:

Be aware of certain pitfalls when specifying date values:

6.2.2.3 The TIME Type

MySQL retrieves and displays TIME values in 'HH:MM:SS' format (or 'HHH:MM:SS' format for large hours values). TIME values may range from '-838:59:59' to '838:59:59'. The reason the hours part may be so large is that the TIME type may be used not only to represent a time of day (which must be less than 24 hours), but also elapsed time or a time interval between two events (which may be much greater than 24 hours, or even negative).

You can specify TIME values in a variety of formats:

For TIME values specified as strings that include a time part delimiter, it is not necessary to specify two digits for hours, minutes, or seconds values that are less than 10. '8:3:2' is the same as '08:03:02'.

Be careful about assigning ``short'' TIME values to a TIME column. Without colons, MySQL interprets values using the assumption that the rightmost digits represent seconds. (MySQL interprets TIME values as elapsed time rather than as time of day.) For example, you might think of '1112' and 1112 as meaning '11:12:00' (12 minutes after 11 o'clock), but MySQL interprets them as '00:11:12' (11 minutes, 12 seconds). Similarly, '12' and 12 are interpreted as '00:00:12'. TIME values with colons, by contrast, are always treated as time of the day. That is '11:12' will mean '11:12:00', not '00:11:12'.

Values that lie outside the TIME range but are otherwise legal are clipped to the appropriate endpoint of the range. For example, '-850:00:00' and '850:00:00' are converted to '-838:59:59' and '838:59:59'.

Illegal TIME values are converted to '00:00:00'. Note that because '00:00:00' is itself a legal TIME value, there is no way to tell, from a value of '00:00:00' stored in a table, whether the original value was specified as '00:00:00' or whether it was illegal.

6.2.2.4 The YEAR Type

The YEAR type is a 1-byte type used for representing years.

MySQL retrieves and displays YEAR values in YYYY format. The range is 1901 to 2155.

You can specify YEAR values in a variety of formats:

Illegal YEAR values are converted to 0000.

6.2.3 String Types

The string types are CHAR, VARCHAR, BLOB, TEXT, ENUM, and SET. This section describes how these types work, their storage requirements, and how to use them in your queries.

Type Max.size Bytes
TINYTEXT or TINYBLOB 2^8-1 255
TEXT or BLOB 2^16-1 (64K-1) 65535
MEDIUMTEXT or MEDIUMBLOB 2^24-1 (16M-1) 16777215
LONGBLOB 2^32-1 (4G-1) 4294967295

6.2.3.1 The CHAR and VARCHAR Types

The CHAR and VARCHAR types are similar, but differ in the way they are stored and retrieved.

The length of a CHAR column is fixed to the length that you declare when you create the table. The length can be any value between 1 and 255. (As of MySQL Version 3.23, the length of CHAR may be 0 to 255.) When CHAR values are stored, they are right-padded with spaces to the specified length. When CHAR values are retrieved, trailing spaces are removed.

Values in VARCHAR columns are variable-length strings. You can declare a VARCHAR column to be any length between 1 and 255, just as for CHAR columns. However, in contrast to CHAR, VARCHAR values are stored using only as many characters as are needed, plus one byte to record the length. Values are not padded; instead, trailing spaces are removed when values are stored. (This space removal differs from the ANSI SQL specification.)

If you assign a value to a CHAR or VARCHAR column that exceeds the column's maximum length, the value is truncated to fit.

The following table illustrates the differences between the two types of columns by showing the result of storing various string values into CHAR(4) and VARCHAR(4) columns:

Value CHAR(4) Storage required VARCHAR(4) Storage required
'' ' ' 4 bytes '' 1 byte
'ab' 'ab ' 4 bytes 'ab' 3 bytes
'abcd' 'abcd' 4 bytes 'abcd' 5 bytes
'abcdefgh' 'abcd' 4 bytes 'abcd' 5 bytes

The values retrieved from the CHAR(4) and VARCHAR(4) columns will be the same in each case, because trailing spaces are removed from CHAR columns upon retrieval.

Values in CHAR and VARCHAR columns are sorted and compared in case-insensitive fashion, unless the BINARY attribute was specified when the table was created. The BINARY attribute means that column values are sorted and compared in case-sensitive fashion according to the ASCII order of the machine where the MySQL server is running. BINARY doesn't affect how the column is stored or retrieved.

The BINARY attribute is sticky. This means that if a column marked BINARY is used in an expression, the whole expression is compared as a BINARY value.

MySQL may silently change the type of a CHAR or VARCHAR column at table creation time. See section 6.5.3.1 Silent Column Specification Changes.

6.2.3.2 The BLOB and TEXT Types

A BLOB is a binary large object that can hold a variable amount of data. The four BLOB types TINYBLOB, BLOB, MEDIUMBLOB, and LONGBLOB differ only in the maximum length of the values they can hold. See section 6.2.6 Column Type Storage Requirements.

The four TEXT types TINYTEXT, TEXT, MEDIUMTEXT, and LONGTEXT correspond to the four BLOB types and have the same maximum lengths and storage requirements. The only difference between BLOB and TEXT types is that sorting and comparison is performed in case-sensitive fashion for BLOB values and case-insensitive fashion for TEXT values. In other words, a TEXT is a case-insensitive BLOB.

If you assign a value to a BLOB or TEXT column that exceeds the column type's maximum length, the value is truncated to fit.

In most respects, you can regard a TEXT column as a VARCHAR column that can be as big as you like. Similarly, you can regard a BLOB column as a VARCHAR BINARY column. The differences are:

MyODBC defines BLOB values as LONGVARBINARY and TEXT values as LONGVARCHAR.

Because BLOB and TEXT values may be extremely long, you may run up against some constraints when using them:

Note that each BLOB or TEXT value is represented internally by a separately allocated object. This is in contrast to all other column types, for which storage is allocated once per column when the table is opened.

6.2.3.3 The ENUM Type

An ENUM is a string object whose value normally is chosen from a list of allowed values that are enumerated explicitly in the column specification at table creation time.

The value may also be the empty string ("") or NULL under certain circumstances:

Each enumeration value has an index:

For example, a column specified as ENUM("one", "two", "three") can have any of the values shown here. The index of each value is also shown:

Value Index
NULL NULL
"" 0
"one" 1
"two" 2
"three" 3

An enumeration can have a maximum of 65535 elements.

Starting from 3.23.51 trailing spaces are automatically deleted from ENUM values when the table is created.

Lettercase is irrelevant when you assign values to an ENUM column. However, values retrieved from the column later have lettercase matching the values that were used to specify the allowable values at table creation time.

If you retrieve an ENUM in a numeric context, the column value's index is returned. For example, you can retrieve numeric values from an ENUM column like this: 

mysql> SELECT enum_col+0 FROM tbl_name;

If you store a number into an ENUM, the number is treated as an index, and the value stored is the enumeration member with that index. (However, this will not work with LOAD DATA, which treats all input as strings.) It's not advisable to store numbers in an ENUM string because it will make things confusing.

ENUM values are sorted according to the order in which the enumeration members were listed in the column specification. (In other words, ENUM values are sorted according to their index numbers.) For example, "a" sorts before "b" for ENUM("a", "b"), but "b" sorts before "a" for ENUM("b", "a"). The empty string sorts before non-empty strings, and NULL values sort before all other enumeration values. To prevent unexpected results, specify the ENUM list in alphabetical order. You can also use GROUP BY CONCAT(col) to make sure the column is sorted alphabetically rather than by index number.

If you want to get all possible values for an ENUM column, you should use: SHOW COLUMNS FROM table_name LIKE enum_column_name and parse the ENUM definition in the second column.

6.2.3.4 The SET Type

A SET is a string object that can have zero or more values, each of which must be chosen from a list of allowed values specified when the table is created. SET column values that consist of multiple set members are specified with members separated by commas (`,'). A consequence of this is that SET member values cannot themselves contain commas.

For example, a column specified as SET("one", "two") NOT NULL can have any of these values: 

""
"one"
"two"
"one,two"

A SET can have a maximum of 64 different members.

Starting from 3.23.51 trailing spaces are automatically deleted from SET values when the table is created.

MySQL stores SET values numerically, with the low-order bit of the stored value corresponding to the first set member. If you retrieve a SET value in a numeric context, the value retrieved has bits set corresponding to the set members that make up the column value. For example, you can retrieve numeric values from a SET column like this: 

mysql> SELECT set_col+0 FROM tbl_name;

If a number is stored into a SET column, the bits that are set in the binary representation of the number determine the set members in the column value. Suppose a column is specified as SET("a","b","c","d"). Then the members have the following bit values:

SET member Decimal value Binary value
a 1 0001
b 2 0010
c 4 0100
d 8 1000

If you assign a value of 9 to this column, that is 1001 in binary, so the first and fourth SET value members "a" and "d" are selected and the resulting value is "a,d".

For a value containing more than one SET element, it does not matter what order the elements are listed in when you insert the value. It also does not matter how many times a given element is listed in the value. When the value is retrieved later, each element in the value will appear once, with elements listed according to the order in which they were specified at table creation time. For example, if a column is specified as SET("a","b","c","d"), then "a,d", "d,a", and "d,a,a,d,d" will all appear as "a,d" when retrieved.

If you set a SET column to an unsupported value, the value will be ignored.

SET values are sorted numerically. NULL values sort before non-NULL SET values.

Normally, you perform a SELECT on a SET column using the LIKE operator or the FIND_IN_SET() function: 

mysql> SELECT * FROM tbl_name WHERE set_col LIKE '%value%';
mysql> SELECT * FROM tbl_name WHERE FIND_IN_SET('value',set_col)>0;

But the following will also work: 

mysql> SELECT * FROM tbl_name WHERE set_col = 'val1,val2';
mysql> SELECT * FROM tbl_name WHERE set_col & 1;

The first of these statements looks for an exact match. The second looks for values containing the first set member.

If you want to get all possible values for a SET column, you should use: SHOW COLUMNS FROM table_name LIKE set_column_name and parse the SET definition in the second column.

6.2.4 Choosing the Right Type for a Column

For the most efficient use of storage, try to use the most precise type in all cases. For example, if an integer column will be used for values in the range between 1 and 99999, MEDIUMINT UNSIGNED is the best type.

Accurate representation of monetary values is a common problem. In MySQL, you should use the DECIMAL type. This is stored as a string, so no loss of accuracy should occur. If accuracy is not too important, the DOUBLE type may also be good enough.

For high precision, you can always convert to a fixed-point type stored in a BIGINT. This allows you to do all calculations with integers and convert results back to floating-point values only when necessary.

6.2.5 Using Column Types from Other Database Engines

To make it easier to use code written for SQL implementations from other vendors, MySQL maps column types as shown in the following table. These mappings make it easier to move table definitions from other database engines to MySQL:

Other vendor type MySQL type
BINARY(NUM) CHAR(NUM) BINARY
CHAR VARYING(NUM) VARCHAR(NUM)
FLOAT4 FLOAT
FLOAT8 DOUBLE
INT1 TINYINT
INT2 SMALLINT
INT3 MEDIUMINT
INT4 INT
INT8 BIGINT
LONG VARBINARY MEDIUMBLOB
LONG VARCHAR MEDIUMTEXT
MIDDLEINT MEDIUMINT
VARBINARY(NUM) VARCHAR(NUM) BINARY

Column type mapping occurs at table creation time. If you create a table with types used by other vendors and then issue a DESCRIBE tbl_name statement, MySQL reports the table structure using the equivalent MySQL types.

6.2.6 Column Type Storage Requirements

The storage requirements for each of the column types supported by MySQL are listed by category.

6.2.6.1 Storage requirements for numeric types

Column type Storage required
TINYINT 1 byte
SMALLINT 2 bytes
MEDIUMINT 3 bytes
INT 4 bytes
INTEGER 4 bytes
BIGINT 8 bytes
FLOAT(X) 4 if X <= 24 or 8 if 25 <= X <= 53
FLOAT 4 bytes
DOUBLE 8 bytes
DOUBLE PRECISION 8 bytes
REAL 8 bytes
DECIMAL(M,D) M+2 bytes if D > 0, M+1 bytes if D = 0 (D+2, if M < D)
NUMERIC(M,D) M+2 bytes if D > 0, M+1 bytes if D = 0 (D+2, if M < D)

6.2.6.2 Storage requirements for date and time types

Column type Storage required
DATE 3 bytes
DATETIME 8 bytes
TIMESTAMP 4 bytes
TIME 3 bytes
YEAR 1 byte

6.2.6.3 Storage requirements for string types

Column type Storage required
CHAR(M) M bytes, 1 <= M <= 255
VARCHAR(M) L+1 bytes, where L <= M and 1 <= M <= 255
TINYBLOB, TINYTEXT L+1 bytes, where L < 2^8
BLOB, TEXT L+2 bytes, where L < 2^16
MEDIUMBLOB, MEDIUMTEXT L+3 bytes, where L < 2^24
LONGBLOB, LONGTEXT L+4 bytes, where L < 2^32
ENUM('value1','value2',...) 1 or 2 bytes, depending on the number of enumeration values (65535 values maximum)
SET('value1','value2',...) 1, 2, 3, 4 or 8 bytes, depending on the number of set members (64 members maximum)

VARCHAR and the BLOB and TEXT types are variable-length types, for which the storage requirements depend on the actual length of column values (represented by L in the preceding table), rather than on the type's maximum possible size. For example, a VARCHAR(10) column can hold a string with a maximum length of 10 characters. The actual storage required is the length of the string (L), plus 1 byte to record the length of the string. For the string 'abcd', L is 4 and the storage requirement is 5 bytes.

The BLOB and TEXT types require 1, 2, 3, or 4 bytes to record the length of the column value, depending on the maximum possible length of the type. See section 6.2.3.2 The BLOB and TEXT Types.

If a table includes any variable-length column types, the record format will also be variable-length. Note that when a table is created, MySQL may, under certain conditions, change a column from a variable-length type to a fixed-length type, or vice-versa. See section 6.5.3.1 Silent Column Specification Changes.

The size of an ENUM object is determined by the number of different enumeration values. One byte is used for enumerations with up to 255 possible values. Two bytes are used for enumerations with up to 65535 values. See section 6.2.3.3 The ENUM Type.

The size of a SET object is determined by the number of different set members. If the set size is N, the object occupies (N+7)/8 bytes, rounded up to 1, 2, 3, 4, or 8 bytes. A SET can have a maximum of 64 members. See section 6.2.3.4 The SET Type.

The maximum size of a row in a MyISAM table is 65534 bytes. Each BLOB and TEXT column accounts for only 5-9 bytes towards this size.

6.3 Functions for Use in SELECT and WHERE Clauses

A select_expression or where_definition in a SQL statement can consist of any expression using the functions described below.

An expression that contains NULL always produces a NULL value unless otherwise indicated in the documentation for the operators and functions involved in the expression.

Note: there must be no whitespace between a function name and the parentheses following it. This helps the MySQL parser distinguish between function calls and references to tables or columns that happen to have the same name as a function. Spaces around arguments are permitted, though.

You can force MySQL to accept spaces after the function name by starting mysqld with --ansi or using the CLIENT_IGNORE_SPACE to mysql_connect(), but in this case all function names will become reserved words. See section 1.8.2 Running MySQL in ANSI Mode.

For the sake of brevity, examples display the output from the mysql program in abbreviated form. So this: 

mysql> SELECT MOD(29,9);
1 rows in set (0.00 sec)

+-----------+
| mod(29,9) |
+-----------+
|         2 |
+-----------+

is displayed like this: 

mysql> SELECT MOD(29,9);
        -> 2

6.3.1 Non-Type-Specific Operators and Functions

6.3.1.1 Parentheses

( ... )

Use parentheses to force the order of evaluation in an expression. For example: 

mysql> SELECT 1+2*3;
        -> 7
mysql> SELECT (1+2)*3;
        -> 9

6.3.1.2 Comparison Operators

Comparison operations result in a value of 1 (TRUE), 0 (FALSE), or NULL. These functions work for both numbers and strings. Strings are automatically converted to numbers and numbers to strings as needed (as in Perl).

MySQL performs comparisons using the following rules:

By default, string comparisons are done in case-independent fashion using the current character set (ISO-8859-1 Latin1 by default, which also works excellently for English).

The following examples illustrate conversion of strings to numbers for comparison operations: 

mysql> SELECT 1 > '6x';
         -> 0
mysql> SELECT 7 > '6x';
         -> 1
mysql> SELECT 0 > 'x6';
         -> 0
mysql> SELECT 0 = 'x6';
         -> 1
=
Equal: 
mysql> SELECT 1 = 0;
        -> 0
mysql> SELECT '0' = 0;
        -> 1
mysql> SELECT '0.0' = 0;
        -> 1
mysql> SELECT '0.01' = 0;
        -> 0
mysql> SELECT '.01' = 0.01;
        -> 1
<>
!=
Not equal: 
mysql> SELECT '.01' <> '0.01';
        -> 1
mysql> SELECT .01 <> '0.01';
        -> 0
mysql> SELECT 'zapp' <> 'zappp';
        -> 1
<=
Less than or equal: 
mysql> SELECT 0.1 <= 2;
        -> 1
<
Less than: 
mysql> SELECT 2 < 2;
        -> 0
>=
Greater than or equal: 
mysql> SELECT 2 >= 2;
        -> 1
>
Greater than: 
mysql> SELECT 2 > 2;
        -> 0
<=>
NULL safe equal: 
mysql> SELECT 1 <=> 1, NULL <=> NULL, 1 <=> NULL;
        -> 1 1 0
IS NULL
IS NOT NULL
Test whether a value is or is not NULL: 
mysql> SELECT 1 IS NULL, 0 IS NULL, NULL IS NULL;
        -> 0 0 1
mysql> SELECT 1 IS NOT NULL, 0 IS NOT NULL, NULL IS NOT NULL;
        -> 1 1 0
To be able to work good with other programs, MySQL supports the following extra features when using IS NULL:
expr BETWEEN min AND max
If expr is greater than or equal to min and expr is less than or equal to max, BETWEEN returns 1, otherwise it returns 0. This is equivalent to the expression (min <= expr AND expr <= max) if all the arguments are of the same type. Otherwise type conversion takes place, according to the rules above, but applied to all the three arguments. Note that before 4.0.5 arguments were converted to the type of expr instead. 
mysql> SELECT 1 BETWEEN 2 AND 3;
        -> 0
mysql> SELECT 'b' BETWEEN 'a' AND 'c';
        -> 1
mysql> SELECT 2 BETWEEN 2 AND '3';
        -> 1
mysql> SELECT 2 BETWEEN 2 AND 'x-3';
        -> 0
expr NOT BETWEEN min AND max
Same as NOT (expr BETWEEN min AND max).
expr IN (value,...)
Returns 1 if expr is any of the values in the IN list, else returns 0. If all values are constants, then all values are evaluated according to the type of expr and sorted. The search for the item is then done using a binary search. This means IN is very quick if the IN value list consists entirely of constants. If expr is a case-sensitive string expression, the string comparison is performed in case-sensitive fashion: 
mysql> SELECT 2 IN (0,3,5,'wefwf');
        -> 0
mysql> SELECT 'wefwf' IN (0,3,5,'wefwf');
        -> 1
From 4.1 (in line with the SQL-99 standard), IN returns NULL not only if the expression on the left hand side is NULL, but also if no match is found in the list and one of the expressions in the list is NULL.
expr NOT IN (value,...)
Same as NOT (expr IN (value,...)).
ISNULL(expr)
If expr is NULL, ISNULL() returns 1, otherwise it returns 0: 
mysql> SELECT ISNULL(1+1);
        -> 0
mysql> SELECT ISNULL(1/0);
        -> 1
Note that a comparison of NULL values using = will always be false!
COALESCE(list)
Returns first non-NULL element in list: 
mysql> SELECT COALESCE(NULL,1);
        -> 1
mysql> SELECT COALESCE(NULL,NULL,NULL);
        -> NULL
INTERVAL(N,N1,N2,N3,...)
Returns 0 if N < N1, 1 if N < N2 and so on. All arguments are treated as integers. It is required that N1 < N2 < N3 < ... < Nn for this function to work correctly. This is because a binary search is used (very fast): 
mysql> SELECT INTERVAL(23, 1, 15, 17, 30, 44, 200);
        -> 3
mysql> SELECT INTERVAL(10, 1, 10, 100, 1000);
        -> 2
mysql> SELECT INTERVAL(22, 23, 30, 44, 200);
        -> 0

If you are comparing case-insensitive strings with any of the standard operators (=, <>..., but not LIKE) trailing whitespace (spaces, tabs and newlines) will be ignored. 

mysql> SELECT "a" ="A \n";
        -> 1

6.3.1.3 Logical Operators

In SQL, all logical operators evaluate to TRUE, FALSE or NULL (UNKNOWN). In MySQL, this is implemented as 1 (TRUE), 0 (FALSE), and NULL. Most of this is common between different SQL databases, however some may return any non-zero value for TRUE.

NOT
!
Logical NOT. Evaluates to 1 if the operand is 0, to 0 if the operand is non-zero, and NOT NULL returns NULL. 
mysql> SELECT NOT 10;
        -> 0
mysql> SELECT NOT 0;
        -> 1
mysql> SELECT NOT NULL;
        -> NULL
mysql> SELECT ! (1+1);
        -> 0
mysql> SELECT ! 1+1;
        -> 1
The last example produces 1 because the expression evaluates the same way as (!1)+1.
AND
&&
Logical AND. Evaluates to 1 if all operands are non-zero and not NULL, to 0 if one or more operands are 0, otherwise NULL is returned. 
mysql> SELECT 1 && 1;
        -> 1
mysql> SELECT 1 && 0;
        -> 0
mysql> SELECT 1 && NULL;
        -> NULL
mysql> SELECT 0 && NULL;
        -> 0
mysql> SELECT NULL && 0;
        -> 0
Please note that MySQL versions prior to 4.0.5 stop evaluation when a NULL is encountered, rather than continuing the process to check for possible 0s. This means that in these versions, SELECT (NULL AND 0) returns NULL instead of 0. In 4.0.5 the code has been re-engineered so that the result will always be as prescribed by ANSI while still using the optimisation wherever possible.
OR
||
Logical OR. Evaluates to 1 if any operand is non-zero, to NULL if any operand is NULL, otherwise 0 is returned. 
mysql> SELECT 1 || 1;
        -> 1
mysql> SELECT 1 || 0;
        -> 1
mysql> SELECT 0 || 0;
        -> 0
mysql> SELECT 0 || NULL;
        -> NULL
mysql> SELECT 1 || NULL;
        -> 1
XOR
Logical XOR. Returns NULL if either operand is NULL. For non-NULL operands, evaluates to 1 if an odd number of operands is non-zero, otherwise 0 is returned. 
mysql> SELECT 1 XOR 1;
        -> 0
mysql> SELECT 1 XOR 0;
        -> 1
mysql> SELECT 1 XOR NULL;
        -> NULL
mysql> SELECT 1 XOR 1 XOR 1;
        -> 1
a XOR b is mathematically equal to (a AND (NOT b)) OR ((NOT a) and b). XOR was added in version 4.0.2.

6.3.1.4 Control Flow Functions

IFNULL(expr1,expr2)
If expr1 is not NULL, IFNULL() returns expr1, else it returns expr2. IFNULL() returns a numeric or string value, depending on the context in which it is used: 
mysql> SELECT IFNULL(1,0);
        -> 1
mysql> SELECT IFNULL(NULL,10);
        -> 10
mysql> SELECT IFNULL(1/0,10);
        -> 10
mysql> SELECT IFNULL(1/0,'yes');
        -> 'yes'
In 4.0.6 and above the default result value of IFNULL(expr1,expr2) is the more 'general' of the two expressions, in the order STRING, REAL or INTEGER.The difference to earlier MySQL versions a